The Daily Maintenance of the Laser Cutting Machine
As valuable machines, the CO2 laser cutting machine and fiber laser cuuting machine are in need of careful daily maintenance to prolong life-span
As a high accurate instrument,the laser cutting machine's daily maintenance(CO2 laser cutting machine and fiber laser cutting machine) is very necessary.Only by maintenance,can laser cutting machine create value for you better and longer,so what should be done to maintain laser cutting machine? There are ten tips to consider.
1.Before opening the machine,you should check the pressure situation of working gas and cutting gas of laser source.
2.Check whether the buttons of zero points of x axis,z axis,y axis and the laser preparation state are damaged or not,make sure the indicator light is normal.
3.Check whether the zero points of x axis,y axis,z axis,Limit switches and collision block mounting screw are loose or not,and whether the limit switches of all axes are sensitive.
4.Check whether the circulating water level of water chiller is enough or not,add enough water if it is insufficient.
5.Check whether the circulating water road of the reflector path leak or not,you must deal with the leakage in time.Otherwise,the lifetime of optical lenses will be affected.
6.After a day's cutting,check whether the lenses of focusing mirror is damaged or not.
7.Check whether the flexible bellows of the reflector path is burned or damaged.
8.After a day's work,you should clean the cutting waste in time,keep the working area clean and neat.At the same time,you should also keep the machine clean,don't put any sundries on the machine.
9.Open the sluice valve of the air cylinder under air compressor,close the valve after the discharge of waste water.
10.Turn off the machine according to the the shutdown step after a day's work,then turn off the main power of the machine.
Thanks for your reading!